Radius Calculator - Authorized Inspector

Home
/
Design Tools
/
Radius Calculator

[ci_circle_calculator]

From Our Sponsor

Two-Phase Vertical Separator

A vertical separator is a cylindrical vessel that is oriented...

Boiler

Boiler Code Compliance A Guide to Meeting Regulatory Standards

When it comes to industrial boilers, cutting corners isn't just...

Heat Exchangers

Double-Pipe Heat Exchangers

Double-pipe heat exchangers are a simple yet effective type of...

U-Stamped Pressure Vessels: A Mark of Quality and Safety

A U-Stamp is a certification mark issued by the National Board of Boiler and Pressure Vessel Inspectors (NBBPVI). It signifies that a pressure vessel has been manufactured and inspected in...

The Role of Water Treatment in Boiler Efficiency and Longevity

A boiler is only as healthy as the water that feeds it. Without proper treatment, boiler feedwater can quietly degrade system performance, corrode metal surfaces, and drastically reduce equipment lifespan.

ASME Section I Power Boilers: A Practical Guide

ASME Section I of the Boiler and Pressure Vessel Code (BPVC) governs the design, construction, and certification of power boilers—the heavy hitters used to generate steam or high‑temperature water for...

Plate Fin Heat Exchangers

A plate fin heat exchanger consists of a core, which is a stack of corrugated plates, and fins, which are attached to the plates to increase the surface area for...

U-Stamp Certification: Material Selection

The ASME® BPVC specifies a range of materials that are suitable for use in pressure vessels and boilers. These materials are often listed in the ASME® Boiler and Pressure Vessel...

Electric Boilers Explained

Electric boilers use electricity to generate steam or hot water — eliminating the need for fuel combustion. Unlike traditional boilers, there are no burners, gas valves, or flue stacks. Heat...

Five basic methods for dehydrating or drying Natural Gas

Glycol dehydrators, also known as gas dehydrators or TEG units, are used to remove water vapor from natural gas. The process of dehydration is important for two reasons.

What Are Modular Boilers?

Modular boilers are compact, factory-assembled boiler units designed to work together in a series — offering scalable steam or hot water generation based on demand. Rather than relying on a...

Horizontal Separators

Horizontal separators are ideally suited to wellstreams having high gas-oil ratios, constant flow, and small liquid surge characteristics. Horizontal separators are smaller and less expensive than vertical separators for a...

Scraped Surface Heat Exchangers

A scraped surface heat exchanger consists of a cylindrical shell with a rotating shaft inside. The shaft is fitted with blades or scrapers that continuously scrape the inner surface of...

Vertical Three-Phase Separators with Downcomer and Spreader

Vertical Three-Phase Separator with A Downcomer and Spreader

A three-phase separator is a crucial piece of equipment in the oil and gas industry, designed to separate a mixture of oil, gas, and water into its individual components. The...

What Are Water-Tube Boilers?

A water-tube boiler is a type of boiler where water circulates inside the tubes, and hot combustion gases flow around the outside of those tubes. This design is ideal for...

Separator Demister Pad

A demister is also known as a demister pad, mist pad, wire mesh demister, mesh mist eliminator, catching mist, and mist eliminator. It is a device often fitted to vapor–liquid...

Applicant’s Guide for Certificates of Authorization

Certification is a pinnacle achievement for fabrication shops, signifying a commitment to excellence and adherence to rigorous quality standards. This distinction sets certified shops apart from those lacking formal documentation,...

Air-Cooled Heat Exchangers

Air-cooled heat exchangers typically consist of a bundle of tubes through which the process fluid flows. Fins are attached to the tubes to increase the surface area for heat transfer....

Navigating the Path to U and U2 Stamp Certifications

ASME Applicants Requesting; New, Multiple, or Renewal Certification

Applicants for new issuance or renewal of an ASME® Certificate(s) of Authorization should be aware that the Joint Review will require implementation and demonstration of their Quality Control Program. The...

Steam Heat Exchanger – Indirect Heater

Steam Heat Exchanger - Indirect Heater is used to heat the well effluent after it flows out of the well and prior to the separating process. This type of heat...

ASME® API 650 Tank Calculations

API 650 is the industry standard for the design and construction of large, field-erected storage tanks that operate at atmospheric pressure or low internal pressures (not exceeding 2.5 psig). These...

Types of Industrial Boilers and Their Applications

Industrial boilers are the beating heart of countless facilities—from chemical plants and refineries to food processing and textile mills. But not all boilers are created equal.

Schematic of two-phase horizontal separator

Two-Phase Horizontal Separators

A horizontal separator is a cylindrical vessel that is oriented horizontally. When a gas-liquid mixture enters the separator, the heavier liquid phase settles to the bottom of the vessel, while...

U-Stamp vs. UM-Stamp: A Comparative Overview

The difference between the U designation and the UM designation is related to size. However, this is not the only difference between the two. UM designated pressure vessels are not...

From Our Sponsor

Articles You May Like

Site Map

Recent Post

Follow Me

Site Map

RECENT POSTS