PP Stamp Archives - Authorized Inspector

Read more about the article Understanding the PP-Stamp: A Mark of Quality for Piping Components

A picture of PP_Stamped piping

Post category:PP Stamp Stamps Vessel Knowledge

Understanding the PP-Stamp: A Mark of Quality for Piping Components

The PP-Stamp is a certification mark issued by the National Board of Boiler and Pressure Vessel Inspectors (NBBPVI). It signifies that a manufacturer is authorized to weld, fit, manufacture, and install piping and components that attach to external piping used for power boilers and pressure vessels.

Continue Reading

Read more about the article ASME B31.1 – A Comprehensive Guide to Power Piping Design

ASME B31.1: A Comprehensive Guide to Power Piping Design

Post category:Fabrication Piping Vessel Knowledge

ASME B31.1 – A Comprehensive Guide to Power Piping Design

The ASME® B31.1 Code for Power Piping is a widely recognized standard that provides guidelines for the design, fabrication, and installation of piping systems for power plants. This code ensures the safety and reliability of piping systems by establishing rigorous design and construction standards.

Continue Reading

No more posts to load

Articles You May Like

U-Stamped Pressure Vessels: A Mark of Quality and Safety

U-Stamped Pressure Vessels: A Mark of Quality and Safety

A U-Stamp is a certification mark issued by the National Board of Boiler and Pressure Vessel Inspectors (NBBPVI). It signifies that a pressure vessel has been manufactured and inspected in...

Types of Industrial Boilers and Their Applications

Types of Industrial Boilers and Their Applications

Industrial boilers are the beating heart of countless facilities—from chemical plants and refineries to food processing and textile mills. But not all boilers are created equal.

A picture of boilers: Boiler Maintenance Best Practices

Boiler Maintenance Best Practices: Avoiding Costly Downtime

In industrial operations, boiler downtime isn’t just an inconvenience—it’s a profit killer. Whether it’s lost production, emergency repair costs, or compliance penalties, a boiler failure can have far-reaching impacts. Fortunately,...

Infographic of API 650 Welded Steel Tanks

ASME API 650 Tank Calculations

API 650 is the industry standard for the design and construction of large, field-erected storage tanks that operate at atmospheric pressure or low internal pressures (not exceeding 2.5 psig). These...

A picture of a Glycol-Dehydration-Unit in service

Five basic methods for dehydrating or drying Natural Gas

Glycol dehydrators, also known as gas dehydrators or TEG units, are used to remove water vapor from natural gas. The process of dehydration is important for two reasons.

A diagram of a Coalescing Gas Separator

Coalescing Gas Separator

Coalescing gas separators are designed specifically for the removal of mist, fog, and dust from gas streams. These contaminants usually exist with the bulk of the particles having diameters considerably...

A illustration of a Three-Phase Separator

What is a Three-Phase Separator

The first step in oil and gas production is to split the flow up into its individual components with a separator. Separator vessel design is a crucial consideration for oil...

Non-Destructive Examination (NDE): A Critical Component of U-Stamp Certification

Non-Destructive Examination (NDE): A Critical Component of U-Stamp Certification

Pictured above: Non-Destructive-Testing Common NDE Techniques Used in U-Stamp Certification: Non-Destructive Examination (NDE) is a crucial aspect of the manufacturing process for pressure vessels and boilers. It involves a variety...

A picture showing a vessel with a U stamp on it

Applicant’s Guide for Certificates of Authorization

Certification is a pinnacle achievement for fabrication shops, signifying a commitment to excellence and adherence to rigorous quality standards. This distinction sets certified shops apart from those lacking formal documentation,...

A picture showing how a Fire-Tube Boiler works

What Is a Fire-Tube Boiler?

A fire-tube boiler is a type of boiler where hot gases pass through tubes, which are surrounded by water. It's one of the most common boiler types used in low-...

Multiple ASME Stamp Certificates. Picture showing to vertical vessels with piping in between them

Navigating the Complexities of Multiple ASME Stamp Certificates of Authorization

Obtaining and maintaining multiple ASME® Stamp Certificates of Authorization (COAs) can be a complex endeavor for manufacturers and fabricators. This blog post will delve into the challenges and strategies associated...

ASME Boiler codes can sound intimidating, especially if you’re not an engineer by trade.

Boiler Code 101: Understanding ASME Boiler Sections (For Non-Engineers)

ASME boiler codes can sound intimidating, especially if you’re not an engineer by trade. The good news? You don’t need to memorize the Code to understand the basics.

Floating Head vs. U-Tube Heat Exchangers: A Comparative Analysis

Floating Head vs. U-Tube Heat Exchangers

Shell and tube heat exchangers are a common type of heat exchanger used in various industries. Within this category, two primary designs stand out: floating head and U-tube. Each design...

A picture of S Stamp Vessels in service

S-Stamp: A Mark of Quality for Power Boilers

An S-Stamp is a certification mark issued by the National Board of Boiler and Pressure Vessel Inspectors (NBBPVI). It signifies that a manufacturer is authorized to build and stamp power...

Vertical-3-Phase-Separator-with a Downcomer and Spreader

Vertical Three-Phase Separator with A Downcomer and Spreader

A three-phase separator is a crucial piece of equipment in the oil and gas industry, designed to separate a mixture of oil, gas, and water into its individual components. The...

A infographic of a Plate Fin Heat Exchanger

Plate and Frame Heat Exchangers

Plate and frame heat exchangers are a type of heat exchanger that uses a series of corrugated plates to transfer heat between two fluids. The plates are stacked together, forming...

Picture of a roll of brown painted Three-Phase Separator

Three-Phase Separator

Produced well fluids consist of various amounts of oil, water, natural gas, and sediment. The first step in oil and gas production is to split the flow up into its...

A picture of a Natural Draft Air Cooler Exchanger

Natural Draft Air Cooler Exchanger

A natural draft air cooler typically consists of a tall, tower-like structure with a large number of finned tubes. The hot process fluid flows through the tubes, and the heat...

Infographic for ASME Section VIII Division 1 Calculations

Key Elements of Section VIII Division 1 Calculations

ASME® Section VIII, Division 1 provides the foundational framework for designing, constructing, and inspecting pressure vessels.

A picture of Ferrous Material Specifications

ASME BPVC Section II, Part A: Ferrous Material Specifications

ASME® BPVC Section II, Part A is a critical reference document for engineers and designers involved in the construction of pressure vessels and boilers. It provides a comprehensive list of...

A picture of: Boiler Code Compliance Infographic

Boiler Code Compliance A Guide to Meeting Regulatory Standards

When it comes to industrial boilers, cutting corners isn't just risky—it’s illegal. Code compliance isn’t a formality; it’s a matter of safety, liability, and operational approval.

×

Enable Notifications OK No thanks